Meshtastic Mesh Networking

Off-grid, long-range communication powered by open-source LoRa technology

What is Meshtastic?

868MHz Bandpass Filter

Custom-designed 868MHz bandpass filter for Meshtastic LoRa nodes. Improves signal quality by rejecting out-of-band interference while minimizing insertion loss in the EU868 band.

🔌

Pico2_W5500_E22

Low-cost LoRa gateway. Custom 1W Meshtastic node with Ethernet connectivity and Power over Ethernet (PoE) support. Deploy anywhere with just a single cable for both data and power.

🔌

Custom PCB carrier board around the WIZnet W5500-EVB-Pico2 (RP2350 with on-board W5500 Ethernet) and an Ebyte E22P (868M30S) LoRa module. A compact, low-cost Ethernet MQTT gateway for Meshtastic, with 802.3af PoE.

🔐

SE050 Breakout

Minimal breakout board for the NXP EdgeLock SE050E2HQ1 secure element, bringing the I²C interface out to a 5-pin 2 mm header. A hardware root of trust for a Meshtastic node: keys that are generated on the chip and never leave it.

USB_CH341_E22P

USB-to-SPI adapter that brings an Ebyte E22P (868M30S) 1 W LoRa module to meshtasticd on any PC or Raspberry Pi, with no GPIO needed. A CH341F bridge plus a TPS2115A power mux that switches over to a DC jack, so the module can transmit at full power without overloading the USB port.

Ready to Go Off-Grid?

We can help you set up and deploy Meshtastic mesh networks for your organization, community, or personal use. Contact us to get started.